6KW Vertical Wind Turbine 120V 220V 380V Wind Generator w/ On Grid Tie Inverter

Description

specifications
1. Security. Adopting the vertical blade and triangular double-pivot design, the main points of force are concentrated in the hub, so that the blades are lost, broken and leaves fly out and other problems are better solved.
2. noise. The use of aircraft wings with horizontal rotation and blade application, reducing noise in the natural environment to imperceptible levels.
3. Wind resistance. Horizontal rotation and triangular double pivot design make it only small wind pressure, so it can withstand 45m/s super typhoon.
4. Radius of rotation. Due to its design structure and special working principle, it has a smaller rotation radius than other types of wind turbines, it saves space while improving efficiency
5. Power generation curve characteristics. The starting wind speed is lower than other types of wind turbines, the rate of increase in power generation is relatively small, so between 5-8 meters wind speed range, it can generate 10-30% power than other types of wind turbines.
6. Effective wind speed range. Through the special control principle, the effective wind speed range is expended to 2.5~25m/s, with the maximum use of wind resources, it achieves higher power generation and improves the economics of wind power investment.
7. Braking device. The blade itself has speed protection and can configure manual mechanical and electronic brakes. In the absence of typhoon and super squall area, the manual brake will suffice.
8. Operation and Maintenance. Permanent magnet generator with direct drive, without gearbox and steering mechanism, regularly (usually every six months) check the connection of the running parts.
9. Application. The turbine could be installed near facilities such as homes, parks, schools, building roofs, roads and pedestrian streets, etc
Specifications:
Rated power: 6000W
Maximum power：6200W
Rated voltage: 96V/120V/220V/380V
Blade length: 360CM
Upper net weight: 250kg
Wind wheel diameter: 3.0 m
Rated wind speed: 12m/s
Start wind speed: 4 m/s
Survival wind speed: 45m/s
Rated speed: 230 RMP
Generator: 3-phase permanent magnet AC synchronous generator
Lifespan: More than 20 years
Blade Material: Aluminum Alloy
Permanent Magnet Material: Rare Earth NdFeB
Control system: electromagnet
Lubrication: grease
Working temperature: -40 to 80
Included in the packaging:
1 * Wind Turbine
3 x Blades
1*on grid Inverter
(The mast is not included, if you need it separately, you can contact us and we can give an additional discount）
Inverter:
Model
WWGI60
Wind Turbine Input
Rated input power
6kW
Max. input power
6.5kW
Rated input voltage
120/220/380Vac
Manual brake
Keep pressing the button for 5s to unload completely,
and then recover by pressing it for another 5s.
Switch “ON” the brake switch
Brake by over wind speed
（
optional
）
18m/s (0~30m/s settable),
it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s.
Brake by over rotational Speed
（
optional
）
500r/min
（
factory
default
，
0~1000r/min
settable
）
Unload completely when reached the set rotational speed, and recover automatically after 10mins.
AC Output
Grid Type
Single/Three-phase
Rated output power
6kW
Rated Grid voltage
120/220/380Vac
Grid voltage range
110-220~260-380Vac
Rated Grid frequency
50Hz
Work frequency range
49Hz~51Hz
Rated output current
14A
Thdi
＜
5%
(at rated power)
Protection Functions
AC output overvoltage/
undervoltage protection
YES
AC output over frequency
/underfrequency protection
YES
AC short circuit protection
YES
Surge protection
YES
Anti-islanding protection
YES
Over-temperature protection
YES
Lightning protection
YES
General Parameters
Display mode
LED
Display information
dump load, grid state, wind generator state, faults
Monitoring contents
wind rotate speed, wind power, AC output voltage /current/power, and fault code
Efficiency
＞
93%
Ambient temperature
-20℃
～
+40℃
Humidity
0%~90%, no condensing
Noise
≤65dB
Cooling mode
Forced air cooling
Cover protection class
IP65
Product dimension (W*H*D)
370
×
545
×
185
mm
Product net weight
19kg
Dump load dimension(W*H*D)
300×550×55mm
Dump load net weight
14kg
Note: Part of parameters can be adjusted according to customer
’
s specific demand.
The blade of the pinwheel is made of high quality aluminum alloy plate, and the surface of the blade is treated with baking paint or electrostatic spray plastic. The anti-corrosion performance is improved, which is beautiful and durable. The color can be made according to customer requirements;
The generator uses the patented rare earth permanent magnet suspension generator with special rotor design, which can effectively reduce the resistance torque of the generator, which is only 1/3 of the normal motor. At the same time, the wind turbine and generator have better matching characteristics and equipment operation safety.
Renewable energies are clean and are available to us in almost unlimited quantities - without charging for them.
The offer includes only the wind turbine with control without mast and inverter
Wind turbine maintenance free
Triple protection against weather all metal elements are galvanized, primed and additionally painted with polyurethane paint.
Generator: 3 phase alternating current (AC) permanent magnet rotor, brushless, gearless, maintenance free, direct drive